▶ These Car model below could not canbus, need to add a resistor to combine use:

DODGE Caliber H10
VW Passat B7 / B6
Fiat 500X
AUDI A4 B7
Toyota corolla E150 / YARIS
Skoda Octavia 2
Smart 451

▶ Please Know:

1. CAN NOT CANBUS FOR HEADLIGHT !! YOU NEED TO PURCHASE A EXTRA RESISTOR TO COMBINE USE, Only replace for Fog Light Daytime Running Lamp.

2. This series designs for Japan and Korea car models. For EU and US Car models, it is recommended to purchase a resistor to combine use. Improper installation can easily cause the LED to burn out.

3. Please make sure the socket and color you selected it's what you need, if you purchase it wrong by yourself, you need to pay for the return fees.

▶ Description:

◆ BMTxms Series : F2 Series

◆ Lumens: 12000 lumens/pair

◆ Power: 30W/bulb 60W/pair， Dual Color Power :24W/bulb 48W/pair

◆ Operating Voltage : DC9-18V

◆ IP Rate : IP67 WaterProof

◆ Light Source Model : 12pcs GC5530 CSP

◆ Color Temperature : 6500K White / 3000K Golden Yellow / 6500K White 3000K Golden Yellow Dual Color

◆ Heat Dissipation: Theory Aviation aluminum 6063

◆ Operating Life: >30,000hrs

◆ Operating Temperature: -40°C~+105°C

◆ Compared with halogen bulbs: Brighter 400%+

◆ Socket: H8 H9 H11 H16JP / 9006 HB4 / 9145 H10 / 9005 HB3 LED Fog DRL Light

◆ Application: LED Fog Lights / Daytime Running Lights DRL Lamp

▶ Features:

◆ 1:1 Same Size Design with halogen bulb

◆ Plug and Play, Non-polarity, Fast Installation

▶ NOTE:

◆ European, American and newest vehicle equipped with CAN-BUS system may require load resistors to bypass the error codes/flicker issue. Please know that the load resistor you need to buy separately.

▶ Instructions for Dual White Yellow bulb:

◆ During work, the color can be switched by the switch within 5 seconds:after 5 seconds, it will reset after the first switch (default white light)

◆ Due to structural reasons, the "Dual White Yellow" will have lower power than the single-color models, about 20W±10%/Pair

▶ Package included:

2 Pieces F2 LED Fog Light / DRL Bulb.

▶ Installation requirements:

◆ Before installation, please turn off the power of the entire vehicle and wait a while to cooling the light . If the LED lights are replaced without turning off the power, the car is prone to abnormal reactions and decoding problems. If the light still hot while you install, maybe you could wear gloves to remove it.

◆ Some LED lights have positive and negative poles. If you encounter a situation where they do not light up, please try rotating the LED lights 180 degrees or swapping the left and right lights for testing.

◆ If the LED size is too small or loose after install, please kindly move the metal pin clips closer so that they can mount the festoon tighter, then contact our online customer service, and we will make after-sales adjustment.

◆ If none of the above can solve your problem, please directly contact the online customer for after-sales solution (please provide original light pictures or installation videos as much as possible, so that after-sales can be carried out faster.)